RouterBitMall

5/32" Slotting Cutter 1/2" Shank Router Bit

$22.00 AUD

Sale Sold out

Shipping calculated at checkout.

Available in yellow and red. Colors will be shipped randomly based on stock availability.

Quantity

Kerf cutters come in a range of widths and depths to accommodate all your slotting needs. Combined with a router bit arbor assembly this creates a slot cutter of your choice.

This slotting cutter router bit assembly cuts 5/32" thick x 9/16" deep slots. Comes complete with 1/2" shank/arbor and bearing, washers and nut.

Bit Specs
Material:Carbide Tippe
Overall Length:2-7/8"
Largest Diameter:2"
Number of Flutes:2
Number of Bits:1
Shank Size:1/2"
Cutting Length:5/32"
Cutting Depth:9/16"

View full details

Good product !

Fast delivery, packaged perfectly, and did the job flawlessly!

Some of the products being sold apparently are inferior quality and are prone to failing or even flying apart on first use. I used it to cut 1/4 grooves in both birch and pine plywood. I was doing drawers, so 4 grooves each on three draws that are about 20x15 inches. (Plus the practice runs to get a feel for it and make sure of the height)

It may be that I'm a novice, but I had the best results doing a "climb cut" where the blade was coming in from the top instead of the side. Otherwise I was blowing out the entire length of the groove.