Available in yellow and red. Colors will be shipped randomly based on stock availability.
Couldn't load pickup availability
Up cut endmills are great for all standard milling and material removal. These bits pull the wood chips up and away from the tool path which helps prevent tool breakage and extends the life of the bit. If a particular finish is required for your project, use a down cut or compression cut end mill for the final pass.
Best used for: Standard milling, dadoing, and boring
Cutting Height: 1" Overall Length: 2-3/4" Shank Diameter: 1/2" Cutting Diameter: 3/8" Flutes: 2 Up-cut endmills direct woodchips up and away from the milling area leaving an unobstructed path for the endmill. Bit breakage is less likely. Up cut end mills are the best choice for most standard milling applications. The up cut direction can leave behind a minimally rough top surface edge.
Bit Specs Material:Solid Carbide Number of Bits:1 Cut Direction:Upcut End Mill Type:Upcut Shank Size:1/2" Overall Length:2-3/4" Cutting Diameter:3/8" Cutting Length:1" Number of Flutes:2 Largest Diameter:1/2"