RouterBitMall

14° X 1" Dovetail 1/2" Shank Router Bit

$22.00 AUD

Sale Sold out

Shipping calculated at checkout.

Available in yellow and red. Colors will be shipped randomly based on stock availability.

Quantity

The dovetail is probably the most recognizable of all woodworking joints. A dovetail joint is self-aligning and interlocking. There are numerous versions of the dovetail joint, including half blind dovetails, through dovetails, mitered dovetails and sliding dovetails. All of these variations are common in casework and drawer construction. A single dovetail bit can make almost any kind of dovetail, depending on the desired size. You'll need a jig to make most dovetail joints, as well as a guide bushing for your router. Check the instructions with your dovetail jig to select a bit with the appropriate angle, which will usually be somewhere between 7 and 14 degrees.

This dovetail bit has a cutting diameter of 1", with an angle of 1° and a cutting height of 7/8". The shank is 1/2" in diameter.

Bit Specs
Material:Carbide
Largest Diameter:1"
Degrees:14°
Number of Flutes:2
Number of Bits:1
Shank Size:1/2"
Cutting Diameter:1"
Cutting Length:7/8"
Overall Length:2-5/8"

View full details

Of course it is not a full size push in and back out to cut for the biscuit, but this is for a router for occasional joining of different size biscuits. I quickly made a small cheap wooden jig that clamps on to the piece I am joining and guides my router to cut in and a very short distance out making a slot of the appropriate size.

'Nothing to say! It does the job.

Resurfacing my deck using Trex and need to cut a groove in the outer boards (square cut) to connect with the inner groove cut boards. The Trex bit is ridiculously expensive! This one is very reasonably priced and arrived quickly. If I ever need another bit, I won't hesitate to buy this products.